IceBear PMZ50-4 50cc Gas Street Legal Scooter

  • 78700

This scooter, with a more classic and elegant look, is perfect for commutes around town, as it is fuel efficient and is of light weight, thus being comfortable to be driven by everyone.

With a 50cc air cooled engine, automatic transmission, a front disc and rear brake drum, it also has the cargo trunk included. It can reach speeds over 30 mph, while maintaining a cool 80+ mpg.

All the information you need to know about it can be found below and don’t forget to pass to the review section to read the opinions of our clients who have already purchased one!

Engine Type Single Cylinder, 4-Stroke
Cooling Air Cooled
Drive System belt
Piston Displacement 49.6 cc
Bore and Stroke 1.54 inches x 1.63 inches
Maximum Power 1.4/5500kw/r/min
Maximum Torque 2.0/4500N.m./rpm
Starter Electric / Kick
Transmission Automatic
Length 67.7 inches
Width 24.6 inches
Height 40.7 inches
Seat Height 28.3 inches
Wheelbase 48 inches
Ground Clearance 4.7 inches
Front Brake Disc
Rear Brake Drum
Front Tire 3.50-10
Rear Tire 3.50-10
Ignition CDI
Maximum Speed 30mph, may vary depending on road condition, rider weight etc.
Net Weight 163.1 lbs
Gross Weight 198.4 lbs
Weight Capacity 220lbs
Battery 12V/7Ah
Fuel Capacity 1.4 gal
Front Suspension Dual Telescopic Forks
Rear Suspension Single Shock
Packing Size 66.1 inches x 18.1 inches x 34.2 inches
Maximum Climbing Gradient 30°
Assembly Required Front Wheel,Front Fender,Front Cover,Handle Bar,Windshield,Pedal Bracket,Rear Box,Rear Box Loop

 

 Some Assembly Required

All Scooters we offer come with some assembly required and usually take around 60-90minutes to complete. Assembly consists of attaching the front wheel (one bolt), front fender (4 screws), handlebars (one bolt installation) and the trunk (4 bolts). We highly recommend you use a thread-locking agent on all parts such as Loctite. All materials needed to perform assembly are included with the scooters, including basic hand tools. If you need help simply contact our support.

Limited Warranty

If you provide a receipt for initial PDI and assembly from a professional mechanic shop, parts are covered under this warranty to be free from  manufacturer defects for 60 days and the engine for 6 months. Without PDI and assembly by a certified/professional mechanic, parts are covered under this warranty will be free for 30 days and engine for one month. 

If any parts received damaged due to poor packaging or bad workmanship by the manufacturer, report such damage within 5 days of receipt of the unit with your order number, VIN # and pictures of damage showing the vehicle in the crate or under assembly. 

Warranty covers core components, but not wear items. Call if you would like details before placing your order. 

Returns and Replacements

Please note that unless you select and pay for a per-delivery inspection and dealer prep, these units are drop-shipped without said inspections. We strongly urge customers to perform an inspection of the scooter upon delivery. If any damages are found please have the driver note on the delivery slip of the damage. We will replace any damaged parts during transit for free OR replace the entire scooter at no charge to you. We strive to make sure each customer is 100% satisfied with their scooter and will make sure anything broken is replaced. We will NOT accept returns that were not authorized prior to being sent back. Simply contact our support staff of any issues you come across and we will get it resolved quickly.

Please email at ireneroberson9@gmail.com and we will provide you with the any manual you need right away. We are constantly updating the site with new stock but we have much more than available in the website.